Installation Instructions
Setting instructions for Trimstone™ medallions
  • Trimstone™ medallions are fabricated in one solid piece and can be handled vertically or horizontally.
  • A competent stone setter experienced in working with slab thickness material should use standard industry recommended installation methods.
  • Trimstone™ medallions can be set using either a mortar bed or a thin set application.
  • Medallions should be clean and free of foreign matter.
  • Sub floor must be clean and level.
  • After mortar is applied, lower medallion into place. Edge of medallion is grouted to the surrounding material.
  • Traffic should not be allowed on medallions for 48 hours after installation, heavy traffic should not be allowed for two weeks after installation.
  • After installation owner should keep stone clean and sealed and grout joints in good repair.

Setting instructions for 3/4" medallions
  • A competent stone setter experienced in working with slab thickness material should use standard industry recommended installation methods.
  • Medallions should be installed in mortar bed allowing ¾" for thickness of the medallion.
  • Medallions should be clean and free of foreign matter. Handle gently as marble is delicate, prior to installation.
  • Sub floor must be clean and level.
  • After mortar is applied, lower medallion into place. Edge of medallion is grouted to surrounding material.
  • Traffic should not be allowed on medallion for 48 hours after installation, and heavy traffic should not be allowed for two weeks after installation.
  • After installation owner should keep stone clean and sealed and grout joints in good repair.

Setting instructions for Trimstone™ panels
Our sales staff is available to conference with installers to provide valuable support and recommendations. Stone is a product of nature and will vary in color, marking and texture. Seller is not responsible for, shall have no liability for, and does not warrant against: shade variation, crazing or wear on stone, or injury caused by slipping, mishap, or other injury due to surface characteristics.Trimstone™ is a marble veneer product and is not recommended for use on floors in high-traffic areas or floors which might be grinded and polished.